Veneer Slicer Knife
Veneer slicer knives produce wide sheets of natural and engineered veneer with a bright, smooth face, reducing sanding work after slicing. Available in several steel grades — high speed steel, BF anti-bluing white steel, 2HS and tool steel — matched to your machine and the species you slice.
- Drawing: required for every order (PDF / DWG / sketch) — the drawing governs
- Material options: HSS / BF anti-bluing white steel / 2HS / tool steel
- Hardness: HRC 57–62
- Edge straightness: ≤ 0.05 mm over full length
- Machines: Horizontal and vertical slicers
Send the drawing first — we quote and produce to it, not to a catalogue size.
Request a QuoteApplications
Horizontal and vertical veneer slicers; wide-face natural veneer and engineered wood face veneer.
Specifications
| Material options | HSS / BF anti-bluing white steel / 2HS / tool steel |
| Hardness | HRC 57–62 |
| Edge straightness | ≤ 0.05 mm over full length |
| Machines | Horizontal and vertical slicers |
Size & Material Chart (Length × Width × Thickness, mm)
| No. | Size (mm) | Material |
|---|---|---|
| 1 | 1550 × 175 × 16 | HSS |
| 2 | 3580 × 200 × 19 | BF white steel (anti-bluing) |
| 3 | 4050 × 200 × 19 | Tool steel |
| 4 | 4190 × 200 × 19 | BF white steel (anti-bluing) |
| 5 | 1550 × 185 × 20.5 | HSS |
| 6 | 3600 × 200 × 21 | Tool steel |
| 7 | 3000 × 200 × 22 | HSS |
| 8 | 3800 × 200 × 22 | BF white steel (anti-bluing) |
| 9 | 3000 × 200 × 24 | HSS |
| 10 | 3350 × 200 × 24 | 2HS high speed steel |
| 11 | 3350 × 200 × 24 | HSS |
| 12 | 3500 × 200 × 24 | 2HS high speed steel |
| 13 | 3500 × 200 × 24 | HSS |
| 14 | 3650 × 200 × 24 | BF white steel (anti-bluing) |
Machines these blades are made for
Slicer knives are long, thin and unforgiving: flatness and edge straightness decide whether the veneer comes off even. These are the slicer builders our blades are commonly supplied for.
Brand names describe machine compatibility only — we are not affiliated with, or an authorised distributor of, these manufacturers. Send the model or a drawing and we confirm the fit before production.
Customisation — any size, hole pattern or edge angle
| Length | 1550–4200 mm |
| Width | 175–200 mm |
| Thickness | 16–24 mm |
| Edge | 2HS / BF anti-bluing, HRC 63.5–64 for surface finish |
| Hole pattern | To your slicer's clamping beam |
| Straightness | ≤ 0.05 mm per metre |
| Order size | 1 piece for a trial, then batch |