Perfecta Guillotine Knife Sizes

Perfecta 92, 115 and 132 guillotine knives in W18Cr4V (T1) or W6Mo5Cr4V2 (M2), HRC 60–64. Perfecta machines take a 140 mm wide body, so a Polar blade of the same length will not clamp — width and thickness have to match the machine, not the model number.

Perfecta sizes Will it fit? Custom Perfecta blades All brands

Perfecta models and sizes

Model	Size L × W × T (mm)	Size (inch)
92	1090 × 140 × 12	42.91 × 5.51 × 0.47
115	1350 × 140 × 12	53.15 × 5.51 × 0.47
132	1515 × 140 × 12	59.65 × 5.51 × 0.47

Three numbers that decide whether a Perfecta blade fits

Body width	140 mm across the 92, 115 and 132. A 125 mm Wohlenberg or 160 mm Polar blade will not sit in the clamp.
Body thickness	12 mm on all three models. Confirm with a micrometer if the machine has been rebuilt.
Hole pattern	Send the old blade or the clamp bar drawing. Hole pitch is the most common reason a Perfecta blade is returned.

Custom Perfecta blades — made to your clamp bar

from 1 pc

If your Perfecta is an older model, a rebuilt machine, or a size that no longer appears in any catalogue, we make the blade to the old one. Send the dimensions and the hole layout — or the old blade itself — and we produce a drawing for your approval before grinding.

What we can change	Options
Length	Any length to your drawing — cut from bar and ground to size
Width	90–160 mm
Thickness	9.7 / 10 / 11.7 / 12 / 12.7 / 13.7 / 13.75 mm, or to your measured value
Hole pattern	4-hole, 5-hole, slotted or countersunk — to drawing or sample
Edge angle	20–23° standard, set to your paper grade on request
Steel	W18Cr4V (T1) / W6Mo5Cr4V2 (M2), HRC 60–64
Marking	Part number or your brand laser-marked
Order size	1 piece for a trial, batch pricing from 10 pieces

No drawing? Send the old blade. We measure it, send a drawing back for approval, and only then cut steel.

Send your Perfecta size or drawing

Frequently asked

Can you make a Perfecta blade to a drawing?

Yes. Length, width, thickness and hole pattern are made to your drawing or sample, from one piece.

Which Perfecta models do you cover?

92, 115 and 132. Other Perfecta models are made to the old blade — send a photo with a ruler and the dimensions.

Do you supply the clamp bar or only the blade?

We supply the blade, and we can match the hole pattern to an existing clamp bar. Send a photo of the bar with a ruler for confirmation.

← Back to the full size chart

Polar guillotine knives · Wohlenberg guillotine knives

Any blade, any machine — custom manufacturing →

Full size chart by machine brand

Brand names are used only to describe machine compatibility. We are not affiliated with, or an authorised distributor of, any of these manufacturers.